Paper Sample on Unlock Sand's Secrets: An Intro to Different Sand Materials

3DEXPERIENCE Platform. Introduction to sand - Make.3dexperience.3ds.com. (2020). Retrieved 3 July 2020, from https://make.3dexperience.3ds.com/materials/introduction-to-sand-materials.

The article introduces sand materials in-depth, allowing the reader to understand what sand is about. There are different categories of sand materials discussed in this piece. They include chromite, silica, and zircon. Each one of them useful in its way and is used in different ways in the construction industry. Chromite is used in construction as part of steel alloys. It is carried in iron chromium oxide, which naturally occurs as sand. Construction workers are always likely to need steel in their construction work. The steel materials are derived from sand in its chromite form.

Is your time best spent reading someone else’s essay? Get a 100% original essay FROM A CERTIFIED WRITER!

Save 25%

The article then discusses silica in depth. It occurs naturally as sand and is estimated to make about 10% of the earth’s crust. Silica is essential in the manufacture of glass. Other than glass materials, it is preferred in sand casting for metallic component manufacturing because it has a high melting point. Telecommunication fibers are also made of silica, and so are porcelain and some stoneware. Silica shows the extensive usage of sand materials, fitting in different industries. Manufacturing, telecommunication, pharmaceutical, and hydraulic fracturing are some of the areas that silica plays a considerable role. When one reads silica, it should dawn on them that they are talking about sand. Another category of sand materials is zircon, used as an opacifier, and in refractories. The importance and applications of sand are wide-ranging.

The article is highly relevant to the research in focus on sand materials and their uses across different industries. The article is centred on defining the various categories of sand and how they are essential in different sectors. Therefore, its relevance to the topic is not in doubt. Further, the article was published in 2020, meaning it’s a recent one with great significance to the current use of sand materials. Regarding bias, the report does not show a bit of bias. The article is fact-based, presenting the methods of sand materials as they are applied in the real world. It is not an opinion piece; it is an informative fact piece. It means that the reliability of the information shared is not in doubt. The facts cited in the article are correct from different sources, which guarantee the accuracy of the information. They have a scientific quality about them.

Before I made a close reflection about sand, I could only see it as a desert soil. However, this article gives me a very different perspective on sand material. Some of the things I treasure most are derivatives of sand. Every time one roll down a car window should know that it is a product of sand. Whenever one is sick and takes a tablet, they should be aware that sand materials played a part in the process. It is about different sectors making use of sand materials to make products.

The broadness of the use of sand material is exciting. This source gave me all those insights, and hence positively contributed to my research. I could now understand sand as not only a construction material but as a significant part of many industries. It was one of the primary contributors to my research, helping support the hypothesis that sand has a variety of uses, and it transcends the fundamental element of being seen as a soil covering deserts and arid areas. Through this article, I got a deeper understanding of the uses of sand in its many forms, and a variety of categories that I had no idea was sand.

Alam, T. (2020). Properties of Good Sand - Civil Engineering. Civiltoday.com. Retrieved 3 July 2020, from https://civiltoday.com/civil-engineering-materials/sand/327-properties-of-good-sand.

Sand is just sand to many people, and one would be forgiven to think all sand is the same. However, Alam (2020) presents a good description of how to understand the properties of good sand. From the perspective of this article, and is presented as a construction material. As a construction material, the author advises that one should always seek to use the best quality of sand to get the best outcome in construction. Alam (2020) covers desirable properties if sand as follows. “…ranging in size from 0.06 mm to 2 mm. Particles which are larger than 0.0078125 mm but smaller than 0.0625 mm are termed silt” (Alam, 2020). The specificity in the guidelines shows just how important it is to consider sand quality. The better the quality, the better the end product of construction

Other than the dimensional properties of sand, there are other properties to consider for sand to be declared of desirable quality. First, it should not have any chemical activity, and as such, should be inert. Alam (2020) also advises that sand grains should be firm and angular, and mostly sharp. Further, the sand should not contain salt particles like calcium chloride. It should also not contain silt and clay, and no organic matter is permitted. If sand meets the said minimum properties, it is considered good quality. It becomes effective in civil engineering works.

The recency of the article is impressive, having been penned in 2020. Therefore, the content contained in the article represents the current and most acceptable practices in the field of construction. The article is published on the platform ‘Civil Today’ where information on civil engineering is usually issued. The online publisher may not be one of the most trustworthy on matters of engineering; hence, one cannot guarantee the credibility of the information.

However, compared to other sources indicates that the details shared are very accurate. Engineers are known with an obsession with accuracy and specificity. The article is based on that sort of accuracy, paying attention to detail on all elements of sand required in construction. However, this accuracy is not a guarantee, because even though the article is published on an engineers’ site, there is no assurance that the author of the specific piece is a qualified engineer.

The author of the article may be biased in favor of attention to detail. It is difficult for construction workers to pay as much attention to the qualities and properties of sand as the author does. Therefore, the applicability of the recommendations in the article in real-life situations is highly in doubt. The features of sand carried in this article are imagined in scientific and ideal ways, which may never be the case in construction. Therefore, this casts the reliability of the article into doubt.

The article plays a considerable role in my research. Sand is primarily used as a construction material in my background. In this case, it is used to make concrete mixtures. On that account, the article forms the basis on which the research argument is based. Tis role of sand introduces my research on uses and applications of sand. Progressively, the study covers more construction uses of sand, but the concrete mixture use is the most basic of them all. Therefore, the article provides a strong base argument about this aspect. Other than being used as naturally occurring sand, sand is also used construction in its derivatives from manufacturing. The article forms the basis of his understanding by discussing the different properties of quality sand.

References

3DEXPERIENCE Platform. Introduction to sand - Make.3dexperience.3ds.com. (2020). Retrieved 3 July 2020, from https://make.3dexperience.3ds.com/materials/introduction-to-sand-materials.

Alam, T. (2020). Properties of Good Sand - Civil Engineering. Civiltoday.com. Retrieved 3 July 2020, from https://civiltoday.com/civil-engineering-materials/sand/327-properties-of-good-sand.