How to Operate a Mini Excavator Paper Example

Introduction

A few decades ago, mini excavators were considered toys by the heavy equipment operators when they were introduced, but they have currently earned the respect of utility construction contractors and professionals of site work with their ease of operation, low cost, small footprint, and precise operation. Therefore, for a person who would wish to operate a mini excavator, here are the steps.

Is your time best spent reading someone else’s essay? Get a 100% original essay FROM A CERTIFIED WRITER!

Save 25%

One should select a machine that is suitable for their project as mini comes in different sizes and preferences may vary according to the type of work or project to be accomplished. He or she should also compare the cost of labor versus the rental cost before investing in a weekend rental as mini excavators can rent for about a hundred and fifty dollars per day excluding pick up, insurance and fuel charges.

Consultation and demonstration on how an excavator work

One should check out the machine range at his or her rental business and inquire whether they can demonstrate and allow clients to be familiar with any machine on their premises. Most large equipment that is rental businesses has an area of maintenance where they can allow one to feel the machine with experienced supervision. The person inquiring for the mini excavator should look over the manual operator to be sure and familiar with the location and the exact controls description as they might vary in some excavators.

One should take a look on the machine to ascertain that there are no loose or damaged parts that might make operation hazardous. These might be items such oil leaks, loose control cables, or other dripping fluids.

Use joysticks to rotate the cab of the machine and in controlling the bucket. When in the neutral position (the position where the joystick returns to when not in use), the movement that is caused by any of the joysticks stops.

Use the right joystick to control the scoping process and make the boom shift up and down. Afterward, scoop using the bucket of the excavator by moving the joystick left or towards the driver and dump the bucket by moving it away from the driver. Notice that these controls direction is intuitive and logical.

Scooping process through the work of the joysticks

The joystick that is on the left controls the entire cab's direction and even contracts or extends the boom. Pulling the left stick contracts, it while pushing the left forward extends the boom. Additionally, pressing the joystick to the left and right will cause the whole cab to rotate to the joystick's direction where pushed.

The gear controlling the cab

Have a glance at the drive rods, (the two sticks that emerge between one's legs). Each drive stick operates independently a unique tread of one side of the excavator where the stick is on. The more or further the stick is moved will change the speed of each turning tread.

The joysticks

Use the floor foot pedals as a super speed boost and in pivoting the hoe. The one located on the left makes the mini excavator move fast and is only used in moving from one direction to another on a leveled terrain, smooth and a straight line. The hoe is tilted by the other pedal to the right or left.

Floor foot pedals

At the right side of the driver's seat, there should be two sticks. The rear is the throttle stick controlling the flow of fuel, and it opens further when one pulls it, giving the engine more gas.

Throttle and dozer-blade stick

Forward of the throttle, there is a dozer-blade control-stick that lifts the blade on pulling it back. Then, press the blade deeper on the ground by pushing forward the stick. The blade of the dozer is pressed forward while scraping the ground same to a mini-bulldozer.

Arrows showing the direction to where the digging should take place by the dozer blade.